Hose Material: Rubber

Rubber hoses come in a wide range of elastomers, are used in a great variety of applications. Compare the features to see which rubber hose is ideal for your needs.
  • RM1 is a premium quality multipurpose Nitrile hose that is recommended for many abusive industrial applications up to 2" diameters. It is oil resistant and right for air, water, and many chemicals as well, and has excellent kink and abrasion resistance. -20F to 180F.
  • RM2 is an economical multipurpose EPDM hose recommended for water and air, as well as many other industrial and construction uses (not suitable for petroleum products) up to 2" diameters. It has excellent weather and abrasion resistance. -40F to 180F.
  • RM2-AS1 is a stocked version of the RM2 air and water rubber hose that is prefitted with universal (Chicago) fittings. Available in 3/4" and 1" in 50 and 75 foot lengths.
  • RM4 is a premium quality heavy duty multipurpose wire reinforced hose recommended for service where the toughest applications and higher pressures are required. It has a bright yellow NBR/Neoprene cover and black Nitrile tube, and is available up to 4" diameter assemblies with NPT thread ends. -20F to 185F.
  • RN1 is a quality rubber suction hose designed for rugged applications, and makes tighter bends without kinking. It is reinforced with textile plies and a helical wire. 1" to 12" diameters. -25F to 185F.
  • RN2 is a lighter weight EPDM rubber suction ready hose reinforced with a polyethylene helix. The external helix provides for easy drag, and it allows a smooth bore. It is also a less expensive than some other rubber suction hoses. 1-1/2" to 4" diameters. -40F to 158F.
  • RD1 is a quality rubber discharge hose designed for applications where suction is not required. This is a versatile choice for many applications, and it includes a top grade EPDM rubber cover. 1-1/2" to 12" diameters. -40F to 180F.
  • RW1 is an economical rubber water hose for industrial and construction applications. Black EPDM tube and smooth for maximum water delivery. 3/8" - 1-1/2" diameters. -40F to 190F.
  • RR1-AS is a high pressure water & air hose assembly often used with washer and cleaner equipment, sprayers, and high pressure air lines. 1/4" to 3/8" diameters in 3,000 psi to 6,000 psi. 20F to 250F.
  • RW1-AS is a quality general service water hose assembly designed for a wide range of applications. It is provided here as a 50ft assembly with brass GHT garden hose fittings. RMA class C. 5/8" and 3/4" diameters. -40F to 190F.
  • RW4 is a quality hose for hot water and steam up to 200F. It is used for cleanup in all manner of sanitary areas and has a white oil and abrasion resistant cover with a black nitrile tube. 1/2" to 1" diameters. -20F to 200F.
  • RA1 pre-made assemblies have a stainless steel braid and thick inner rubber construction, with brass ends. It has excellent flexibility and kink prevention with no exposed rubber. 1/2" to 1-1/2" diameters. -20 to 200F.
  • RO1 is a top quality multipurpose hose for use with convenient push-on fittings that require no tools. It has an oil and heat resistant nitrile tube and neoprene oil resistant cover. All sizes are 300psi and RMA Class A. 1/4" to 3/4" diameters. -40F to 190F.
  • RL1 is a general purpose lay-flat discharge hose with a rubber SBR age resistant tube. Its all polyester cover will not absorb water, and is ready for rough treatment. Does not stiffen in temperatures from -25 to 185F. 1" to 4" diameters.
  • RH1 is a heavier weight rubber material transfer hose designed to handle a variety of slurries & highly abrasive materials. A thick, FDA natural rubber tube is used for abrasion resistance, with a high grade cover. 2" to 12" diameters. -40F to 190F.
  • RH2 is a rugged abrasive resistant rubber pipe hose used for slurries and dry materials that can be field cut to fit. Thick Natural Rubber/SBR rubber tube liner. It is used with our split high grade aluminum 150# split flanges. 2" to 14" diameters. Temperature -25F to 180F
  • RC2 is an quality UHMWPE lined and EPDM covered, suction ready chemical hose with good flexibility and kink-resistant construction. 1" to 6" diameters. -40F to 250F.
  • RC3 is a chemical and paint hose with a nylon tube. It is designed for use with paints, varnishes, thinners, solvents, kerosene and many other chemicals at higher pressures. 1/4" to 1" diameters. -30 to 160F.
  • RT1 is a quality rubber steam hose with a heat resistant EPDM tube and cover for maximum life. 1/2" to 3" diameters. -20F to 415F.
  • RB1 is used for conducting sand, steel shot or other abrasives at high velocity. Used with OD mounted sand blast couplings. 1/2" to 2" diameters. 25F to 180F.
  • RS5 is a high quality food discharge hose for oily and non-oily edible products and potable water. Gray Neoprene cover and abrasion resistant cover with Nitrile tube. Meets FDA, Potable Water, & USDA requirements. 2" to 4" diameters. -22 to 185F.
  • RS1 is a high quality food transfer hose for suction or discharge of non-oil edible products. Gray EPDM cover with a white Chlorobutyl tube. Handles CIP cleaning solutions and can be steam cleaned. Meets FDA & 3A requirements. 3/4" to 4" diameters. -40F to 240F.
  • RS7 is a high quality suction hose used for conveying potable drinking water. It includes a blue weather and abrasion reistant EPDM cover, and a special white FDA plastic tube. 1" to 4" diameters. 180F.
  • The Model CS1 is a high quality and very sturdy sanitary silicone hose for food and pharmaceutical service that can be cleaned in place. 1/4" to 4" diameters. -76F - 356F.
  • CM1 silicone hose is rated for 350F temperatures. 1/4 inch to 4 inch diameters.
  • RP1 is the industry standard for suction ready in-plant, tank truck and general transfer of gasoline, oil, and refined petroleum products at 150psi pressures. Also available in ready made assemblies. 1-1/4" to 4" diameters. -40F to 180F.
  • RP3-AS assemblies are used for petroleum and gas dispensing from pumps, and include a hardwall construction. It has a long service life and kink resistance. Comes in standard lengths with fittings. UL 330 approved. 5/8" & 1" diameters. -40F to 120F.
  • RP5-AS hose assemblies are used for delivery of fuel oil in many services. Good for fuel oils, gasoline, kerosene, diesel, and bio-diesel. Abrasion, kink, and weather resistant cover, and Nitrile oil resistant tube. 1" to 1-1/2" diameters, in 25ft increments starting at 100ft. -40F to 180F.
  • RD4 is a nitrile rubber lay-flat discharge hose that is lighter and more compact in storage than standard rubber discharge hoses. It is also oil resistant, with a good temperature range. 2" to 8" diameters. -20F to 200F.
  • RP8-AS assemblies handle fluids including petroleum products on docks and ships, and comes with fixed by floating 150# built-in steel flanges. Meets U.S.C.G. 33CFR 154.500. 250psi rating. 4" thru 14" diameters. -40F to 190F.
  • RP8 is a heavy, rugged suction-ready hose that handles fluids including petroleum produts on marine docks and ships. It also available as ready made assemblies as the RP8-AS. 250psi. 2" to 12". -40 to 190F.
  • RP9 is designed to handle high temperature petroleum based materials, including asphalt, tar, oil and others. It is appropriate for suction service, and has an abrasion and weather resistant cover. 2" to 4" diameters. -40F to 350F.
  • RP1C is similar to the RP1, but with a corrugated cover for extra flexibility. A suction ready hose for in-plant, tank truck and general transfer of gasoline, oil, and refined petroleum products at 150psi pressures. 2" to 8" diameters. -40F to 180F.
  • RP1HP hose is similar to the RP1, but is rated for higher pressure. A suction ready for in-plant, tank truck and general transfer of gasoline, oil, and refined petroleum products products at 300psi. 1-1/4" to 4". -40F to 180F.
  • RP1HPCC is similar to the RP1HP, but with a corrugated cover for extra flexibility. A suction ready hose for in-plant, tank truck and general transfer of gasoline, oil, and refined petroleum products at 300psi pressures. 2" to 6" diameters. -40F to 180F.
  • RP6 is a severe service oil discharge hose that can be used in heavy duty oil waste, drilling muds, and other non-refined petroleum applications. 500psi high pressure, in 2" - 4" diameters. -40 to 180F.
  • RV1 hose can slip over piping outer diameters for a sleeve fit. 7/8" to 12-3/4" inner diameters. -40F to 210F.
  • RV2 hose can slip over piping outer diameters for a sleeve fit, and includes a wire helix reinforcement. 1/2" to 6" inner diameters. -30F to 212F.
  • RK1-AS rugged concrete and cement placement hose assemblies, in both textile and wire reinforcements. With standard VIC or HD fittings, as well as metric or clamps. 1-1/2" - 5" diameters.
  • RU1-AS Pressure Washer Hoses are available in three grades/colors of gray, black, and blue. 3/8" diameters can be used on pressure wash machines. With unique cover compound.
  • The RD6-SLP Rubber Slip Ring Coupled Rubber Discharge Hose is a lightweight collapsible water hose that is connected without fittings. Includes male & female ends that allow the hoses to be connected quickly and economically in the field. Comes in lengths of 50 ft for 4" to 24" diameters. -40F to +180F.
  • RE1 Elephant Trunk hose is for open end discharge of dry bulk materials and abrasives. It has an 1/8" thick gum rubber tube, and a black SBR cover. -20F to 160F.
  • The Model HM1 is a rubber SAE 100R1AT hydraulic hose for pressure hydraulic oil and other systems. It uses a black Nitrile tube and black Neoprene cover with one wire braid reinforcement. MSHA approved. 3/16" to 1" diameters. -40F to 212F.
  • The Model HM2 is a rubber SAE 100R2AT hydraulic hose for high pressure hydraulic oil and other systems. It uses a black Nitrile tube and black Neoprene cover with two wire braid reinforcements. 1/4" to 2" diameters. MSHA approved. -40F to 212F.
  • The Model HM3 is a rubber SAE 100R12 hydraulic hose for very high pressures. It uses a black oil resistant tube and gray Neoprene cover with four spiral steel wire reinforcement. MSHA approved. 3/8" to 2" diameters. -40F to 250F.
  • TD1 is a tough and light weight thermoplastic rubber hose that is very well suited to most industrial duct and fume jobs, as well as light material handling. 1-1/2" to 24" diameters. -60F to 275F.
  • TD7 is a tough and light weight double-ply neoprene coated polyester fabric hose with good crush resistance and tensile strength. Excellent abrasion resistance, and flame retardant to UL 94V-0. 1" to 24" diameters standard, custom to 60". -40F to 250F.
  • FD1 is a top quality rubber duct hose for high temperature air flow and fume removal. A two-ply fiberglass, coated with silicone gives a rating of 500 deg F, and the smooth bore allows for maximum air flow. 1" to 12" diameters. -75F to 550F.
  • FD2 is a silicone duct hose for fume and exhaust at high temperatures. It is extremely flexible and the external scuff guard adds to the superior strength of the hose. UL 94V-0 flame retardant. -65F to 550F. 3" to 18".
  • RG1 is a special rubber hose for vehicle exhaust. It can be completely flattened and retruns to its original shape. Resistant to heat, aging, gasoline, oil, and fumes. Flared on one end to allow for connection of multiple 11 foot lengths. 2" to 4" diameters. -20F to 375F.
  • RS10 is a hose suitable for hot edible oils, up to 350F, 275F constant, and will not impair taste. Used for hot edible liquids, oil fat filters, fryers, many others. White, FDA nitrile tube, and wire braid reinforcement. 1/2", 5/8",and 3/4" diameters.
  • RS4 is a high quality food transfer hose for suction or discharge of a wide variety of oily and nonoily edible products and potable water. Gray Neoprene abrasion resistant cover with a white Nitrile tube that is reinforced with a wire helix. Meets FDA, Potable Water, and USDA requirements. 1-1/2" to 4" diameters. -22F - 185F.