.png)
OVERVIEW: All discharge hoses below are used specifically for the discharge side of a pump. Most are soft wall and collapsible, and some roll up flat. Compare the various discharge hose benefits to determine the best choice for your application.
-
PD1 PVC LAYFLAT DISCHARGE HOSE PD1 is a PVC blue discharge lay-flat hose that resists kinking and twisting. Designed as a standard duty hose for water discharge in industrial and construction applications. It is economical and rolls up flat for easy storage. 3/4" to 16" diameters. 5F to 130F. -
PD2 PVC HEAVY DUTY LAFLAT DISCHARGE HOSE PD2 is a red PVC discharge lay-flat hose that resists kinking and twisting. It is designed as a heavy duty hose for water discharge in industrial and construction applications, is strong and rolls up flat for easy storage. 1-1/2" to 8" diameters. 5F to 130F. -
PD3 PVC EXTRA HEAVY DISCHARGE HOSE PD3 is a PVC yellow discharge lay-flat hose that resists kinking and twisting for use at higher pressures. It is designed as an extra heavy duty hose for discharge in industrial and construction applications, is strong and rolls up flat for easy storage. 1-1/2" to 6". -10F to 150F. -
RL1 MILL DISCHARGE HOSE RL1 is a general purpose lay-flat discharge hose with a rubber SBR age resistant tube. Its all polyester cover will not absorb water, and is ready for rough treatment. Does not stiffen in temperatures from -25 to 185F. 1-1/2" to 6" diameters. -
RD1 RUBBER DISCHARGE HOSE RD1 is a quality rubber discharge hose designed for applications where suction is not required. This is a versatile choice for many applications, and it includes a top grade EPDM rubber cover. 1-1/2" to 12" diameters. -40F to 180F. -
RD4 RUBBER LAYFLAT DISCHARGE HOSE RD4 is a nitrile/PVC rubber lay-flat discharge hose that is lighter and more compact in storage than standard rubber discharge hoses. It is also oil resistant, with a good temperature range. 2" to 6" diameters. -20F to 210F. -
RD6-SLP SLIP RING COUPLED DISCHARGE HOSE The RD6-SLP Rubber Slip Ring Coupled Rubber Discharge Hose is a lightweight collapsible water hose that is connected without fittings. Includes male & female ends that allow the hoses to be connected quickly and economically in the field. Comes in lengths of 50 ft for 4" to 24" diameters. -40F to +180F. -
UD5 TPU TRANSFER LAYFLAT HOSE UD5 is a thermoplastic polyurethane lay-flat discharge hose for higher pressure water and other liquid applications requiring maximum abrasion resistance and toughness, up to 660 foot continuous lengths. Grooved, Storz, and other fittings available. 4" to 16" diameters. -
UD2 TPU FUEL & CHEMICAL LAYFLAT HOSE UD2 is a polyurethane lay-flat discharge hose for fuels and other flammable liquids. It is designed as light and compact hose for the harshest abrasion and chemical environments. 2" to 6" diameters in lengths as long as 660 feet. -58F to 180F. -
UD1 TPU POTABLE WATER LAYFLAT HOSE UD1 is a Polyurethane premium quality lay-flat discharge hose designed for potable water or food service. This light, high quality hose is extremely tough against abrasion and tears, and is usable at higher pressures. Meets NSF 61 and CRF 177.2600. 1" to 12", and in lengths up to 660ft long. -58F - 158F. -
UD4 TPU FRACKING WATER LAYFLAT HOSE UD4 is a Polyurethane lay-flat discharge hose designed for fracking water or other extremely tough applications. This high quality hose resists abrasion and tears, and is usable at higher pressures and 660ft lengths. 4" to 16". -58F to 180F. -
PWH-AS WATER HOSE ASSEMBLY The PWH-AS assembly is a superior water hose that hooks up with standard garden hose fittings. Lighter and stronger than standard garden hoses, it also stays kink free and is crush resistant. Available in 50ft or 100ft assemblies. -
RL2-AS LAYFLAT WATER HOSE ASSEMBLY The RL2-AS assembly is a layflat water hose that hooks up with standard garden hose fittings. Compact storage and a special low friction liner makes this a smart choice for many applications. Available in 50ft or 100ft assemblies. -
RP6 OIL DISCHARGE HOSE RP6 is a severe service oil discharge hose that can be used in heavy duty oil waste, drilling muds, and other non-refined petroleum applications. 500psi high pressure, in 2" - 4" diameters. -40 to 180F. -
RM1 MULTIPURPOSE RUBBER NITRILE HOSE RM1 is a premium quality multipurpose Nitrile hose that is recommended for many abusive industrial applications up to 2" diameters. It is oil resistant and right for air, water, and many chemicals as well, and has excellent kink and abrasion resistance. -20F to 180F. -
RS7 POTABLE WATER SUCTION/DISCHARGE HOSE RS7 is a high quality suction hose used for conveying potable drinking water. It includes a blue weather and abrasion resistant EPDM cover, and a special white FDA plastic tube. 1" to 4" diameters. 180F. -
SB1 STAINLESS SINGLE BRAIDED METAL HOSE SB1 is a very popular corrugated stainless steel hose with a single stainless steel braid. It is resistant to bursting, cracking, and crushing, while being quite flexible. 1/4" to 24" diameters. -320F to 1500F. -
RL1 CxE MILL DISCHARGE HOSE RL1 is a general purpose lay-flat discharge hose with a rubber SBR age resistant tube. Its all polyester cover will not absorb water, and is ready for rough treatment. Does not stiffen in temperatures from -25 to 185F. 1-1/2" to 6" diameters. -
PD1 CxE PVC LAYFLAT DISCHARGE HOSE PD1 is a PVC blue discharge lay-flat hose that resists kinking and twisting. Designed as a standard duty hose for water discharge in industrial and construction applications. It is economical and rolls up flat for easy storage. Here available with aluminum CxE cam & groove fittings from 1" to 16" diameters in 50ft lengths. -
PD2 CxE PVC HEAVY DUTY LAFLAT DISCHARGE PD2 is a red PVC discharge lay-flat hose that resists kinking and twisting. It is designed as a heavy duty hose for water discharge in industrial and construction applications, is strong and rolls up flat for easy storage. 1-1/2" to 6" diameters. 5F to 130F. -
PD1 MxF PVC LAYFLAT DISCHARGE HOSE PD1 is a PVC blue discharge lay-flat hose that resists kinking and twisting. Designed as a standard duty hose for water discharge in industrial and construction applications. It is economical and rolls up flat for easy storage. 3/4" to 16" diameters. 5F to 130F. -
PD2 MxF PVC HEAVY DUTY LAFLAT DISCHARGE PD2 is a red PVC discharge lay-flat hose that resists kinking and twisting. It is designed as a heavy duty hose for water discharge in industrial and construction applications, is strong and rolls up flat for easy storage. 1-1/2" to 8" diameters. 5F to 130F. -
RL1 MxF MILL DISCHARGE HOSE RL1 is a general purpose lay-flat discharge hose with a rubber SBR age resistant tube. Its all polyester cover will not absorb water, and is ready for rough treatment. Does not stiffen in temperatures from -25 to 185F. 1-1/2" to 6" diameters.