Hose Material: Metal

Flexible metal hoses are used in a variety of demanding applications throughout industry. Corrugated stainless steel hose usually comes with a braid, and interlocked hose is available unpacked, packed, or with a liner for material transfer.
  • SB1 is a corrugated stainless steel hose with a stainless steel braid. It is resistant to bursting, cracking, and crushing, while being quite flexible. 1/4" to 24" diameters. -320F to 1500F.
  • SB2 is a corrugated stainless steel hose with a double stainless steel braid for a higher pressure capacity than the SB1 single braided hose. It is resistant to bursting, cracking, and crushing, while being quite flexible. 1/4" to 24" diameters. -320F to 1500F.
  • SB3 is a very high pressure corrugated stainless steel hose with a stainless steel braid. It has a higher pressure capacity than the standard braided metal hoses. 1/4" to 12" diameters. -320F to 1500F.
  • BB1 is a corrugated bronze hose with a single bronze braid. It has a high pressure capacity at high temperatures. It is resistant to bursting, cracking, and crushing, while being quite flexible. 1/4" to 3" diameters. -50F to 450F.
  • SU1 is a corrugated stainless steel hose that can be used at lower pressures at high temperatures. For higher pressures, see the braided metal hoses options. 1/4" to 24" diameters. -320F to 1500F.
  • RA1 pre-made assemblies have a stainless steel braid and thick inner rubber construction, with brass ends. It has excellent flexibility and kink prevention with no exposed rubber. 1/2" to 1-1/2" diameters. -20 to 200F.
  • TS1 is a smooth bore PTFE hose with a stainless steel braiding. It is lightweight, and handles a very broad range of chemicals at relatively high pressures. It is used in applications where continual large bending is not required. 3/16" to 1-1/4" diameters. -65F to 450F.
  • TC1 is a convoluted PTFE hose with a stainless steel braiding. The convolutions provide a far tighter bend radius than the smooth bore alternatives. It is lightweight, and handles a very broad range of chemicals at relatively high pressures. 3/8" to 4" diameters. -65F to 400F.
  • SI1 is a stripwound interlocked stainless steel hose. It is relatively lightweight but tough, with a rough bore, and is resistant to high temperatures. Applications include bulk material handling, hot fume, engine exhaust, and many others. 1" to 14" diameters. -50F to 1200F.
  • SI2 is a stripwound interlocked stainless steel hose that contains a packing for pressure tight service, unlike the SI1, which is unpacked. 1" to 16" diameters.
  • SI3 is a stripwound interlocked stainless steel hose with a smooth bore for ideal material handling. It is relatively lightweight but tough, and is resistant to high temperatures. 1" to 14" diameters. -50F to 1200F.
  • MD1 is a helically corrugated aluminum hose that is light weight, hand bendable, self-supporting and stationary. Standard lengths 5 & 10 feet. 2" to 12". -100 to 400F.
  • MD2 is a helically corrugated 316 stainless steel duct hose that is light weight, hand bendable, self-supporting and stationary, and works with harsh chemical fumes and high temperatures. 2" to 12". -60 to 800F.
  • MD3 is a roll lock corrugated 316Ti stainless steel duct hose that is tought, flexible, and self-supporting, and works with harsh chemical fumes and extreme high temperatures. 3" to 12". -60 to 1650F.