|
|
RS4 RUBBER SANITARY SUCTION HOSE - RS4 is a high quality food transfer hose for suction or discharge of a wide variety of oily and nonoily edible products and potable water. Gray Neoprene abrasion resistant cover with a white Nitrile tube that is reinforced with a wire helix. Meets FDA & 3A requirements. 1-1/2" to 4" diameters. -40F to 200F.
|
|
|
RS5 RUBBER SANITARY DISCHARGE HOSE - RS5 is a high quality food discharge hose for oily and non-oily edible products and potable water. Gray Neoprene cover and abrasion resistant cover with Nitrile tube. Meets FDA & 3A requirements. 2" to 4" diameters. -40 to 200F.
|
|
|
RS1 SANITARY RUBBER SUCTION HOSE - RS1 is a high quality food transfer hose for suction or discharge of non-oil edible products. Gray EPDM cover with a white Chlorobutyl tube. Handles CIP cleaning solutions and can be steam cleaned. Meets FDA & 3A requirements. 3/4" to 4" diameters. -40F to 240F.
|
|
|
RS7 POTABLE WATER SUCTION HOSE - RS7 is a high quality suction hose used for conveying potable drinking water for suction or discharge. A blue weather and abrasion reistant EPDM cover, and a white FDA neoprene rubber tube. 1" to 4" diameters. -25 to 180F.
|
|
|
RS8 POTABLE WATER DISCHARGE HOSE - RS8 is a high quality hose used for conveying potable drinking water for discharge. A blue weather and abrasion reistant EPDM cover, and a white FDA neoprene rubber tube. 3/4" to 4" diameters. -25 to 180F.
|
|
|
UD1 POTABLE WATER LAYFLAT DISCHARGE HOSE - UD1 is a Polyurethane lay-flat discharge hose designed for potable water or food service. This high quality hose resists abrasion and tears, and is usable at higher pressures. Meets NSF 61 and CRF 177.2600. 1" to 12". -58F - 158F.
|
|
|
PS1 FOOD & DAIRY HANDLING HOSE - PS1 is a clear, high quality PVC hose for food, dairy, and other sanitary handling, or where see-through flow is required. It complies with 3A and FDA requirements. Construction includes a white PVC helix. 1-1/2" to 6" diameters. 15F to 130F.
|
|
|
PH2 PVC CLEAR MATERIAL HANDLING HOSE - PH2 is a clear PVC dry material handling hose provides quiet operation and visual confirmation of flow. Food grade, FDA, USDA, and 3-A approved. 1" to 8" diameters. 15F to 150F.
|
|
|
RH1 RUBBER MATERIAL HANDLING HOSE - RH1 is a heavier weight rubber material transfer hose designed to handle a variety of slurries & highly abrasive materials. A thick, FDA natural rubber tube is used for abrasion resistance, with a high grade cover. 1-1/2" to 12" diameters. -20F to 190F.
|
|
|
RH2 RUBBER MATERIAL HANDLING HOSE - RH2 is a rugged abrasive resistant rubber pipe hose used for slurries and dry materials that can be field cut to fit. It is used with our split high grade aluminum 150# split flanges. Lengths up to 60 feet. 2" to 14" diameters. Temperature -25F to 180F
|
|
|
PT2 PVC CLEAR HOSE - PT2 is a crystal clear unreinforced PVC hose with a smooth interior. FDA, USDA, 3A and NSF grade. 1/16" to 2" diameters. 25F to 150F.
|
|
|
PT1 PVC BRAID REINFORCED HOSE - PT1 is a clear PVC hose tubing with a polyester yarn braid reinforcment for higher pressures. FDA, USDA, 3A and NSF grade. 3/16" to 2" diameters. 25F to 150F.
|
|
|
PT5 PVC WIRE REINFORCED VACUUM HOSE - PT5 is a clear PVC tubing with a wire reinforcment for higher vacuum, higher pressures, and added flexiblility without kinking. FDA, USDA, 3A and NSF grade. 3/8" to 3" diameters. 25F to 150F.
|
|
|
CS1 SANITARY SILICONE HP HOSE - The Model CS1 is a high quality and very sturdy sanitary silicone hose for food and pharmaceutical service that can be cleaned in place. 1/4" to 4" diameters. -125F to 464F.
|
|
|
TD4 THERMOPLASTIC RUBBER FDA DUCT HOSE - TD4 is a white thermoplastic rubber hose that is food and pharmaceutical compatible with FDA acceptable. It is very well suited to most lower pressure duct and dry food applications, with superior chemical resistance. 2" to 14" diameters. -60F to 275F.
|
|
|
ET1 LLDPE POLYETHYLENE TUBING HOSE - ET1 is an LLDPE Polyethylene Tubing that is economical and lightweight, and stands up to environmental stress cracking and higher pressures. The chemically inert linear low density polyethylene is also a food grade material. 1/8" to 1" diameters. -50F to 140F.
|
|
|
TR2 TEFLON® RUBBER CVR SMOOTH BORE HOSE - TR2 is a rubber covered, smooth bore FEP Teflon ® hose. It handles a very broad range of chemicals and is used in countless tough chemical, pharmaceutical and sanitary applications. 1/2" to 3" diameters. -30F to 300F.
|
|
|
RW4 WASH-DOWN HOSE - RW4 is a quality hose for hot water and steam up to 200F. It is used for cleanup in all manner of sanitary areas and has a white oil and abrasion resistant cover with a black nitrile tube. 1/2" to 3/4" diameters. -20F to 200F.
|
|
|
TS1 TEFLON ® SMOOTH BORE BRAIDED HOSE - TS1 is a smooth bore PTFE Teflon ® hose with a stainless steel braiding. It is lightweight, and handles a very broad range of chemicals at relatively high pressures. It is used in applications where continual large bending is not required. 3/16" to 1-1/4" diameters. -65F to 450F.
|
CART
