Hose Application: Special Purpose

The hoses shown here are used in specific applications not covered elsewhere. Call the factory if your specific application is not shown.
  • RR1-AS is a high pressure water & air hose assembly often used with washer and cleaner equipment, sprayers, and high pressure air lines. 1/4" to 3/8" diameters in 3,000 psi to 6,000 psi. 20F to 250F.
  • RW4 is a quality hose for hot water and steam up to 200F. It is used for cleanup in all manner of sanitary areas and has a white oil and abrasion resistant cover with a black nitrile tube. 1/2" to 1" diameters. -20F to 200F.
  • RC3 is a chemical and paint hose with a nylon tube. It is designed for use with paints, varnishes, thinners, solvents, kerosene and many other chemicals at higher pressures. 1/4" to 1" diameters. -30 to 160F.
  • PP1 and PP2 are quality higher pressure PVC blend spray hoses with abrasion resistant ribbed covers. Often used in agricultural and pest control spraying applications, they are resistant to fertilizers and most pesticides. The hoses are tough, kink resistant, light weight and very flexible. 1/4" to 1/2" diameters. 0F to 150F.
  • PP1 and PP2 are quality higher pressure PVC blend spray hoses with abrasion resistant ribbed covers. Often used in agricultural and pest control spraying applications, they are resistant to fertilizers and most pesticides. The hoses are tough, kink resistant, light weight and very flexible. 3/8" to 1" diameters. 0F to 150F.
  • RV1 hose can slip over piping outer diameters for a sleeve fit. 7/8" to 12-3/4" inner diameters. -40F to 210F.
  • RV2 hose can slip over piping outer diameters for a sleeve fit, and includes a wire helix reinforcement. 1/2" to 6" inner diameters. -30F to 212F.
  • RB1 is used for conducting sand, steel shot or other abrasives at high velocity. Used with OD mounted sand blast couplings. 1/2" to 2" diameters. 25F to 180F.
  • LS1 is a lightweight, crush resistant and non-kinking plastic suction hose that retains its excellent flexibility even in the cold weather. A smooth bore tube minimizes material buildup and is resistant to a variety of chemicals in sanitary and many other demanding applications. Available in 1.5, 2, 3 and 4 inch diameters. -40F to 140F.
  • RN2 is a lighter weight EPDM rubber suction ready hose reinforced with a polyethylene helix. The external helix provides for easy drag, and it allows a smooth bore. It is also a less expensive than some other rubber suction hoses. 1-1/2" to 4" diameters. -40F to 158F.
  • PV1 is a vacuum PVC hose that can be used across a wide range of air handling and vacuum applications. Composed of a high strength fiber reinforced PVC, and offering excellent flexibility for ease of use. 3/4" to 2" diameters. -10F to 160F.
  • RP8-AS assemblies handle fluids including petroleum products on docks and ships, and comes with fixed by floating 150# built-in steel flanges. Meets U.S.C.G. 33CFR 154.500. 250psi rating. 4" thru 14" diameters. -40F to 190F.
  • VB1 is a lightweight, economical, and durable utility hose is designed for maximum airflow in positive pressure venting applications. It resists UV rays, ozone, and mildew, and can be easily stored as well. 3" to 24" diameters standard, custom to 48". -20F to 180F.
  • RA1 pre-made assemblies have a stainless steel braid and thick inner rubber construction, with brass ends. It has excellent flexibility and kink prevention with no exposed rubber. 1/2" to 1-1/2" diameters. -20 to 200F.
  • RP9 is designed to handle high temperature petroleum based materials, including asphalt, tar, oil and others. It is appropriate for suction service, and has an abrasion and weather resistant cover. 2" to 4" diameters. -40F to 350F.
  • VB3 is an insulated blower hose of high quality, intended for temporary heating and cooling. It resists UV rays, ozone, and mildew, and can be easily stored as well. It is available in diameters from 6" to 24". -20F to 180F.
  • SI2 is a stripwound interlocked stainless steel hose that contains a packing for pressure tight service, unlike the SI1, which is unpacked. 1" to 16" diameters.
  • FW1 is for welding exhaust at high temperatures. It has a heavy duty silicone & fiberglass construction with an aluminized outer skin. -20F to 600F. 4" to 24".
  • RP5-AS hose assemblies are used for delivery of fuel oil in many services. Good for fuel oils, gasoline, kerosene, diesel, and bio-diesel. Abrasion, kink, and weather resistant cover, and Nitrile oil resistant tube. 1" to 1-1/2" diameters, in 25ft increments starting at 100ft. -40F to 180F.
  • UD1 is a Polyurethane premium quality lay-flat discharge hose designed for potable water or food service. This light, high quality hose is extremely tough against abrasion and tears, and is usable at higher pressures. Meets NSF 61 and CRF 177.2600. 1" to 12", and in lengths up to 660ft long. -58F - 158F.
  • UD4 is a Polyurethane lay-flat discharge hose designed for fracking water or other tough applications. This high quality hose resists abrasion and tears, and is usable at higher pressures of 150 and 200psi, and 660ft lengths. 4" to 12". -58F - 170F.
  • PI1 is a self-supporting interlocked PVC fume and duct hose that has the unique property or staying in place when moved. 2" to 12" diameters. -10F to 150F.
  • RU1-AS Pressure Washer Hoses are available in three grades/colors of gray, black, and blue. 3/8" diameters can be used on pressure wash machines. With unique cover compound.
  • RK1-AS rugged concrete and cement placement hose assemblies, in both textile and wire reinforcements. With standard VIC or HD fittings, as well as metric or clamps. 1-1/2" - 5" diameters.