|
|
LS1 PLASTIC SUCTION HOSE - LS1 is a lightweight, crush resistant and non-kinking plastic suction hose that retains its excellent flexibility even in the cold weather. A smooth bore tube minimizes material buildup and is resistant to a variety of chemicals in sanitary and many other demanding applications. 1-1/2" to 4" diameters. -40F to 140F.
|
|
|
ET1 LLDPE POLYETHYLENE TUBING HOSE - ET1 is an LLDPE Polyethylene Tubing that is economical and lightweight, and stands up to environmental stress cracking and higher pressures. The chemically inert linear low density polyethylene is also a food grade material. 1/8" to 1" diameters. -50F to 140F.
|
|
|
TD1 THERMOPLASTIC RUBBER DUCT HOSE - TD1 is a tough and light weight thermoplastic rubber hose that is very well suited to most industrial duct and fume jobs, as well as light material handling. 2" to 24" diameters. -60F to 275F.
|
|
|
TD5 POLYURETHANE MATERIAL HANDLING HOSE - TD5 is a clear polyurethane hose that is well suited for many material handling and ducting applications requiring both light weight and abrasion resistance. Extremely flexible and FDA. 2" to 24". -65F to 225F.
|
|
|
PV1 INDUSTRIAL VACUUM HOSE - PV1 is a vacuum PVC hose that can be used across a wide range of air handling and vacuum applications. Composed of a high strength fiber reinforced PVC, and offering excellent flexibility for ease of use. 3/4" to 2" diameters. -10F to 160F.
|
|
|
VB1 UTILITY BLOWER HOSE - VB1 is a lightweight, economical, and durable utility hose is designed for maximum airflow in positive pressure venting applications. It resists UV rays, ozone, and mildew, and can be easily stored as well. 3" to 24" diameters. -20F to 180F.
|
|
|
VB3 INSULATED BLOWER HOSE - VB3 is an insulated blower hose of high quality, intended for temporary heating and cooling. It resists UV rays, ozone, and mildew, and can be easily stored as well. It is available in diameters from 4" to 24". -20F to 180F.
|
|
|
TD10 HIGH TEMPERATURE DUCT HOSE - TD10 is a very high temperature, highly flexible duct hose, made of a fine wire reinforced cereramic cloth. Used for high temperature fume recovery up to 1000F, and is flame resistant. -200F to 1000F. 3" to 24".
|
|
|
FW1 WELD EXHAUST HOSE - FW1 is for welding exhaust at high temperatures. It has a heavy duty silicone & fiberglass construction with an aluminized outer skin. -20F to 600F. 4" to 24".
|
|
|
CS1 SANITARY SILICONE HP HOSE - The Model CS1 is a high quality and very sturdy sanitary silicone hose for food and pharmaceutical service that can be cleaned in place. 1/4" to 4" diameters. -125F to 464F.
|
|
|
UD1 POTABLE WATER LAYFLAT DISCHARGE HOSE - UD1 is a Polyurethane lay-flat discharge hose designed for potable water or food service. This high quality hose resists abrasion and tears, and is usable at higher pressures. Meets NSF 61 and CRF 177.2600. 1" to 12". -58F - 158F.
|
|
|
UD2 CHEMICAL & OIL LAYFLAT DISCHARGE HOS - UD2 is a polyurethane lay-flat discharge hose for chemicals and fuel applications. It is designed as light and compact hose for the harshest environments. Static discharge wire optional. 1" to 6". -58F to 176F.
|
CART
