Petroleum Hoses



"Exceptional Industrial Hose Assemblies"
  HOME | E-MAIL | REQUEST HELP | ABOUT US |  CART 800-584-4168 | FX 312-421-6327 

Hose Application: Petroleum

Most of the petroleum hoses are broken down by refined petroleum vs. oilfield, smooth cover vs. corrugated, and suction vs. discharge service. Other, smaller diameter fuel hoses are included as well, with differing properties.



Model Image
RP1 PETROLEUM HOSE - RP1 is the industry standard for suction ready in-plant, tank truck and general transfer of gasoline, oil, and refined petroleum products at 150psi pressures. Also available in ready made assemblies. 1-1/4" to 4" diameters. -40F to 180F.


Model Image
RP1C PETROLEUM CORRUGATED HOSE - RP1C is similar to the RP1, but with a corrugated cover for extra flexibility. A suction ready hose for in-plant, tank truck and general transfer of gasoline, oil, and refined petroleum products at 150psi pressures. 2" to 8" diameters. -40F to 180F.


Model Image
RP1HP PETROLEUM HIGH PRESSURE HOSE - RP1HP hose is similar to the RP1, but is rated for higher pressure. A suction ready for in-plant, tank truck and general transfer of gasoline, oil, and refined petroleum products products at 300psi. 1-1/4" to 4". -40F to 180F.


Model Image
RP1HPC PETROLEUM HIGH PRES CORGD HOSE - RP1HPCC is similar to the RP1HP, but with a corrugated cover for extra flexibility. A suction ready hose for in-plant, tank truck and general transfer of gasoline, oil, and refined petroleum products at 300psi pressures. 2" to 6" diameters. -40F to 180F.


Model Image
RP6 OIL DISCHARGE HOSE - RP6 is a severe service oil discharge hose that can be used in heavy duty oil waste, drilling muds, and other non-refined petroleum applications. 500psi high pressure, in 2" - 4" diameters. -40 to 180F.


Model Image
RP8-AS DOCK HOSE ASSEMBLIES - RP8-AS assemblies handle fluids including petroleum products on docks and ships, and comes with fixed by floating 150# built-in steel flanges. Meets U.S.C.G. 33CFR 154.500. 250psi rating. 4" thru 14" diameters. -40F to 190F.


Model Image
RP8 DOCK HOSE - RP8 is a heavy, rugged suction-ready hose that handles fluids including petroleum produts on marine docks and ships. It also available as ready made assemblies as the RP8-AS. 250psi. 2" to 12". -40 to 190F.


Model Image
MP1 COMPOSITE PETROLEUM HOSE - MP1 composite petroleum hose is very flexible, and has multiple layers of construction which safely prevent sudden catastrophic failure. 1" to 8" diameters. -40F to 212F (or 300F, contact factory).


Model Image
MP2 COMPOSITE SPECIAL PETROLEUM HOSE - MP2 composite special petroleum hose is lightweight, flexible, and has multiple layers of construction which safely prevent sudden catastrophic failure. Special for benzene, aviation fuel, ehtanol, and gasoline with additives. 1" to 8" diameters. -40F to 250F.


Model Image
RP3 HARDWALL GASOLINE CURB PUMP HOSE - RP3 is used for petroleum and gas dispensing from pumps requiring a hardwall construction. It has a long service life and kink resistance. UL 330 and ULC approved. 3/4" & 1" diameters. -40F to 140F.


Model Image
RP5-AS FUEL OIL DELIVERY HOSE - RP5-AS hose assemblies are used for delivery of fuel oil in many services. Good for fuel oils, gasoline, kerosene, diesel, and bio-diesel. Abrasion, kink, and weather resistant cover, and Nitrile oil resistant tube. 1" to 1-1/2" diameters, in 25ft increments starting at 100ft. -40F to 180F.


Model Image
UD2 CHEMICAL & OIL LAYFLAT HOSE - UD2 is a polyurethane lay-flat discharge hose for chemicals and fuel applications. It is designed as light and compact hose for the harshest abrasion and chemical environments. 4" to 12". -58F to 170F.


Model Image
MB1 COMPOSITE BIODIESEL HOSE - MB1 composite biodiesel hose is very flexible, and has multiple layers of construction which safely prevent sudden catastrophic failure. High quality hose for biodiesel and ethanol fuel blends. 1" to 8" diameters. -40F to 180F.


Model Image
ML1 COMPOSITE BOTTOM LOADING HOSE - ML1 composite bottom loading hose is lightweight, flexible, and has multiple layers of construction which safely prevent sudden catastrophic failure. For premium service on hose loading arms in petroleum bottom loading operations. 1" to 8" diameters. -40F to 212F.


Model Image
MV1 COMPOSITE VAPOR RECOVERY HOSE - MV1 composite petroleum and petrochemical vapor recovery hose is lightweight, flexible, and has multiple layers of construction which safely prevent sudden catastrophic failure. Designed for ship-to-shore, bottom loading, and tank truck applications. 1" to 8" diameters. -40F to 212F.


Model Image
RP9 HOT TAR & ASPHALT HOSE - RP9 is designed to handle high temperature petroleum based materials, including asphalt, tar, oil and others. It is appropriate for suction service, and has an abrasion and weather resistant cover. 2" to 4" diameters. -40F to 350F.


Model Image
RM1 MULTIPURPOSE RUBBER NITRILE HOSE - RM1 is a premium quality multipurpose Nitrile hose that is recommended for many abusive industrial applications up to 2" diameters. It is oil resistant and right for air, water, and may chemicals as well, and has excellent kink and abrasion resistance. -20F to 190F.


Model Image
SB1 STAINLESS SINGLE BRAIDED METAL HOSE - SB1 is a corrugated stainless steel hose with a stainless steel braid. It is resistant to bursting, cracking, and crushing, while being quite flexible. 1/4" to 24" diameters. -320F to 1500F.


© 2006 Hosecraft USA. All Rights Reserved.
Terms and Conditions | Credit Application | sales@hosecraftusa.com | 800-584-4168
2315 W. Hubbard Street
Chicago, IL 60612 USA