|
|
ET1 LLDPE POLYETHYLENE TUBING HOSE - ET1 is an LLDPE Polyethylene Tubing that is economical and lightweight, and stands up to environmental stress cracking and higher pressures. The chemically inert linear low density polyethylene is also a food grade material. 1/8" to 3/4" diameters. -50F to 140F.
|
|
|
PT2 PVC CLEAR HOSE - PT2 is a crystal clear unreinforced PVC hose with a smooth interior. FDA, USDA, 3A and NSF grade. 1/16" to 2" diameters. 25F to 150F.
|
|
|
PT1 PVC BRAID REINFORCED HOSE - PT1 is a clear PVC hose tubing with a polyester yarn braid reinforcment for higher pressures. FDA, USDA, 3A and NSF grade. 3/16" to 2" diameters. 25F to 150F.
|
|
|
PT5 PVC WIRE REINFORCED VACUUM HOSE - PT5 is a clear PVC tubing with a wire reinforcment for higher vacuum, higher pressures, and added flexiblility without kinking. FDA, USDA, 3A and NSF grade. 3/8" to 3" diameters. 25F to 150F.
|
|
|
CS1 SANITARY SILICONE HP HOSE - The Model CS1 is a high quality and very sturdy sanitary silicone hose for food and pharmaceutical service that can be cleaned in place. 1/4" to 4" diameters. -125F to 464F.
|
|
|
RO1 PUSH-ON HOSE - RO1 is a top quality multipurpose hose for use with convenient push-on fittings that require no tools. It has an oil and heat resistant nitrile tube and neoprene oil resistant cover. All sizes are 300psi and RMA Class A. 1/4" to 3/4" diameters. -40F to 190F.
|
|
|
TS1 TEFLON® SMOOTH BORE BRAIDED HOSE - TS1 is a smooth bore PTFE Teflon ® hose with a stainless steel braiding. It is lightweight, and handles a very broad range of chemicals at relatively high pressures. It is used in applications where continual large bending is not required. 3/16" to 1-1/4" diameters. -65F to 450F.
|
CART
