|
|
CAM & GROOVE ACCESSORY FITTINGS - Adapt your equipment with NPT threads to quickly connect to cam & groove hoses. Also includes dust plugs & covers. In aluminum, stainless steel, and polypropylene. 1/4" to 6" diameters.
|
|
|
CAM & GROOVE FITTINGS - Simply slide the male and female ends together and press the cam levers down to couple for liquids or bulk materials. In aluminum, stainless steel, and polypropylene. 1" to 6" diameters.
|
|
|
UNIVERSAL FITTINGS - Universal (Chicago or Crowsfoot) fittings quickly connect hoses for both air and water with a push and a twist. Adapters are available that screw on to your equipment. Up to 1" diameters.
|
|
|
SUCTION HOSE FITTINGS - These economic and popular threaded fittings are normally provided in aluminum with a brass female swivel, and seal with a gasket. 1-1/4" to 6" diameters.
|
|
|
KING NIPPLE FITTINGS - Male NPT thread in plated steel are available up to 8" diameters.
|
|
|
BALL & SOCKET FITTINGS - Bauer style ball & socket fittings have a double pin locking lever for smooth, quick closing. Adapters are available to screw to your equipment. 2" to 12" diameters.
|
|
|
BRASS THREAD FITTINGS - Brass NPT threads make a seal without a gasket to the female swivel. 1/4" to 1" diameters.
|
|
|
GARDEN HOSE THREAD FITTINGS - Quality garden hose fittings (GHT) for use with 3/8" through 3/4" diameter hose.
|
|
|
SAND BLAST FITTINGS - Fittings for use with our sand blast hose, along with nozzle holders. Attach to OD of hose to avoid wear. 1-1/4" to 1-1/2" diameters.
|
|
|
GROUND JOINT FITTINGS - Also known as "Boss" fittings, ground joints provide a convenient NPT threaded fitting for higher pressures. Recommended for steam. 3/8" to 4" diameters.
|
|
|
DRY BREAK FITTINGS - For the fail-safe transfer of hazardous and expensive fluids, these high quality dry break couplings are engaged with a simple rotation. Available in aluminum, brass, and stainless steel, in diameters from 3/4” to 6”.
|
|
|
BRASS HOSE MENDER - Used to permanently attach two hoses together. 1/4" to 1/2" diameters
|
|
|
WATER BRASS NOZZLE - Brass twist hose nozzle for garden hose threads (GHT).
|
|
|
WATER PISTOL NOZZLE - Insulated pistol nozzle for water with garden hose threads (GHT).
|
|
|
ADJUSTABLE NOZZLE - Industrial fog nozzle is available in NST and NPSH and has an adjustable spray. 3/4" to 2-1/2" diameters.
|
|
|
STRAIGHT TIP NOZZLE - Straight tip brass nozzle for water service. 3/4" to 2-1/2" diameters.
|
|
|
WASH DOWN PISTOL NOZZLE - This high quality, elevated temperature pistol nozzle protects from hot water temperatures. Lightweight aluminum alloy body and thermal insulating sleeve. 200F at 150psi.
|
|
|
GASOLINE FUEL NOZZLE - Fuel Nozzle for gasoline.
|
|
|
DIESEL FUEL NOZZLE - Fuel Nozzle for diesel.
|
|
|
RH2 HOSE SPLIT FLANGE - The split aluminum flange clamps over the top of the RH2 Hose for a quick field fit. Available in diameters up to 12".
|
|
|
DUCT HOSE COUPLER - These couplers allow for connecting sections of duct hose toghether, with the use of clamps.
|
|
|
LATCH-LOCK FITTINGS - The Latch-Lock Fittings are for use with our duct/exhaust hoses to provide a solid method of connection. This provides the most secure connection possible.
|
|
|
J-LOCK FITTINGS - The 304SS J-Lock Fittings are for use with our duct/exhaust hoses to provide a solid method of connection. A simple twist connects the two sections.
|
|
|
RG EXHAUST TAILPIPE ADAPTER - Tailpipe adapter fittings for the RG1 Garage Exhaust hose. 2" to 4".
|
|
|
RG EXHAUST SPLICE CONNECTOR - Splice connector for the 4" RG1 Garage Exhaust hose.
|
|
|
RG EXHAUST Y CONNECTOR - Y connector for the RG1 Garage Exhaust hose. 2" to 4".
|
|
|
RG EXHAUST DOOR PORT - Door Port for the RG1 Garage Exhaust hose. 2" to 4".
|
|
|
VACUUM CUFF - This vinyl cuff screws on to the PV vacuum hoseS.
|
CART
